Description
Titanium bar are divided into pure titanium bar and titanium alloy bars. For pure titanium bars we mainly provide Gr1, Gr2, Gr4 and other grades; we provide titanium alloy bars of Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc.

Titanium bar is one of the most common kinds of titanium products. It is the base material of many titanium products for further processing. The larger diameter titanium bar can be directly produced by forging. We have the free forging equipment which helps to produce the large size titanium bars. In the process of forging, the titanium ingot is deformed uniformly in a short time from inside to outside, improved the titanium mechanical properties. The material quality has been greatly improved compared to the hammer forging; Small diameter titanium bars can be produced after multiple rolling and annealing, and removed titanium oxide layer by mechanical processing in the end.

We provide turning surface and polished surface of titanium bar. At the same time, we have plenty of titanium bars inventory in different sizes, for those customers with urgent demands on the time of delivery and the customers with a small amount needed.


UNS No.

	UNS No.			UNS No.
Gr1	UNS R50250	CP-Ti	Gr11	UNS R52250	Ti-0.15Pd
Gr2	UNS R50400	CP-Ti	Gr12	UNS R53400	Ti-0.3Mo-0.8Ni
Gr4	UNS R50700	CP-Ti	Gr16	UNS R52402	Ti-0.05Pd
Gr7	UNS R52400	Ti-0.20Pd	Gr23	UNS R56407	Ti-6Al-4V ELI
Gr9	UNS R56320	Ti-3Al-2.5V

Specifications

Grade	Status	Diameter(mm)	Length(mm)
Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11,Gr12,Gr16,Gr23	Hot rolled (R)	6～115	10～6000
	Cold rolled (Y)
	Annealed (M)

Chemical composition

Grade	Chemical composition, weight percent (%)
	C (≤)	O (≤)	N (≤)	H (≤)	Fe (≤)	Al	V	Pd	Ru	Ni	Mo	Other Elements Max. each	Other Elements Max. total
Gr1	0.08	0.18	0.03	0.015	0.20	—	—	—	—	—	—	0.1	0.4
Gr2	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr4	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr5	0.08	0.20	0.05	0.015	0.40	5.5～6.75	3.5～4.5	—	—	—	—	0.1	0.4
Gr7	0.08	0.25	0.03	0.015	0.30	—	—	0.12～0.25	—	0.12～0.25	—	0.1	0.4
Gr9	0.08	0.15	0.03	0.015	0.25	2.5～3.5	2.0～3.0	—	—	—	—	0.1	0.4
Gr11	0.08	0.18	0.03	0.15	0.2	—	—	0.12～0.25	—	—	—	0.1	0.4
Gr12	0.08	0.25	0.03	0.15	0.3	—	—	—	—	0.6～0.9	0.2～0.4	0.1	0.4
Gr16	0.08	0.25	0.03	0.15	0.3	—	—	0.04～0.08	—	—	—	0.1	0.4
Gr23	0.08	0.13	0.03	0.125	0.25	5.5～6.5	3.5～4.5	—	—	—	—	0.1	0.1

Physical properties

Grade	Physical properties
	Tensile strength Min		Yield strength Min (0.2%,offset)		Elongation in 4D Min (%)	Reduction of Area Min (%)
	ksi	MPa	ksi	MPa
Gr1	35	240	20	138	24	30
Gr2	50	345	40	275	20	30
Gr4	80	550	70	483	15	25
Gr5	130	895	120	828	10	25
Gr7	50	345	40	275	20	30
Gr9	90	620	70	483	15	25
Gr11	35	240	20	138	24	30
Gr12	70	483	50	345	18	25
Gr16	50	345	40	275	20	30
Gr23	120	828	110	759	10	15

Tolerance (mm)

Diameter	Size variations	Out of round, Out of square
6.0～8.0	±0.13	0.20
8.0～11.0	±0.15	0.23
11.0～16.0	±0.18	0.25
16.0～22.0	±0.20	0.30
22.0～25.0	±0.23	0.33
25.0～28.0	±0.25	0.38
28.0～32.0	±0.28	0.41
32.0～35.0	±0.30	0.46
35.0～38.0	±0.36	0.53
38.0～50.0	±0.40	0.58
50.0～65.0	+0.79	0.58
65.0～90.0	+1.19	0.89
90.0～115.0	+1.59	1.17

We can provide round bar, square bar, hexagonal bar, eight square bar, flat bar etc.

Testing

• Chemical composition test
• Physical properties test
• Appearance defects inspection
• Ultrasonic flaw detection
• Eddy current testing

Packaging
In order to avoid the titanium bars have any collision in transit or damage, usually wrapped with pearl cotton (expandable polyethylene), and then packed into wooden case for delivery.

• Previous：no information
• Next：no information