Products

Titanium plate

Material: CP titanium, Titanium alloy
Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Size: Thickness: 5～mm, Width: ≥ 400mm, Length: ≤ 6000mm
Standard: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc
Status: Hot Rolled (R), Cold Rolled(Y), Annealed (M), Solution treatment (ST)

Description
We press the titanium sponge into a cylindrical electrode with a hydraulic press. Then melt the titanium electrode into titanium ingot by vacuum consumable arc furnace (usually smelt two times). After the heating process of titanium ingot (our advanced heating furnace ensured the heating uniformity of the titanium ingot from inside to outside), use the 16MN free forging machine to breakdown under high temperature condition. The technique of drawing can be used to break the internal grain of titanium ingot, which improved the quality of the whole billet effectively. Take the processed titanium slab for grinding, removing the oxide layer, and then rolling, annealing, grinding and pickling processing, until the production of titanium plate to the right size. Our advanced equipment and scientific rolling technology ensure the production of titanium plate internal structure and appearance of the surface to maintain a high level of quality.

We mainly provide Gr1, Gr2, Gr4, and other grades of pure titanium plate; and the titanium alloy plate in Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23, etc.

Specification

Grade	Status	Specification
Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11, Gr12,Gr16,Gr23	Hot Rolled(R) Cold Rolled(Y) Annealed(M) Solution treatment(ST)	Thickness(mm)	Width(mm)	Length(mm)
Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11, Gr12,Gr16,Gr23		5.0～60	≥400	≤ 6000

If you need the smaller thickness, you can click titanium sheet.

Chemical composition

Grade	Chemical composition, weight percent (%)
Grade	C ≤	O ≤	N ≤	H ≤	Fe ≤	Al	V	Pd	Ru	Ni	Mo	Other Elements Max. each	Other Elements Max. total
Gr1	0.08	0.18	0.03	0.015	0.20	—	—	—	—	—	—	0.1	0.4
Gr2	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr4	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr5	0.08	0.20	0.05	0.015	0.40	5.5～6.75	3.5～4.5	—	—	—	—	0.1	0.4
Gr7	0.08	0.25	0.03	0.015	0.30	—	—	0.12～0.25	—	0.12～0.25	—	0.1	0.4
Gr9	0.08	0.15	0.03	0.015	0.25	2.5～3.5	2.0～3.0	—	—	—	—	0.1	0.4
Gr11	0.08	0.18	0.03	0.15	0.2	—	—	0.12～0.25	—	—	—	0.1	0.4
Gr12	0.08	0.25	0.03	0.15	0.3	—	—	—	—	0.6～0.9	0.2～0.4	0.1	0.4
Gr16	0.08	0.25	0.03	0.15	0.3	—	—	0.04～0.08	—	—	—	0.1	0.4
Gr23	0.08	0.13	0.03	0.125	0.25	5.5～6.5	3.5～4.5	—	—	—	—	0.1	0.1

Physical properties

Grade	Physical properties
	Tensile strength Min		Yield strength (0.2%, offset)				Elongation in 50mm Min (%)
	ksi	MPa	Min		Max
	ksi	MPa	ksi	MPa	ksi	MPa
Gr1	35	240	20	138	45	310	24
Gr2	50	345	40	275	65	450	20
Gr4	80	550	70	483	95	655	15
Gr5	130	895	120	828	—	—	10
Gr7	50	345	40	275	65	450	20
Gr9	90	620	70	483	—	—	15
Gr11	35	240	20	138	45	310	24
Gr12	70	483	50	345	—	—	18
Gr16	50	345	40	275	65	450	20
Gr23	120	828	110	759	—	—	10

Tolerance (mm)

Thickness	Width tolerance
Thickness	400~1000	1000~2000	＞2000
5.0～6.0	±0.35	±0.40	±0.60
6.0～8.0	±0.40	±0.60	±0.80
8.0～10.0	±0.50	±0.60	±0.80
10.0～15.0	±0.70	±0.80	±1.00
15.0～20.0	±0.70	±0.90	±1.10
20.0～30.0	±0.90	±1.00	±1.20
30.0～40.0	±1.10	±1.20	±1.50
40.0～50.0	±1.20	±1.50	±2.00
50.0～60.0	±1.60	±2.00	±2.50

Testing
Chemical composition test
Physical properties test
Appearance defects inspection
Ultrasonic flaw detection
Eddy current testing

Packaging
In order to avoid the titanium plates have any collision in transit or damage, usually wrapped with pearl cotton (expandable polyethylene), and then packed into wooden case for delivery.

Home

Tel

Contact